  |
|
|
6volt Headunit Adapter for SIRIUS XM Radio Receivers
Please use the PDF below to determine which PIE adapter is right for your car or vehicle.
- Works with all 6volt SIRIUS XM Radio Receivers.
- This one-piece solution provides power and auxillary input for your factory headunit.
- Available for many of the most popular cars, trucks and SUVs on the road today.
- Provides a factory-like install by providing another auxillary input.
- This PIE AUX 6 allows you to connect your satellite radio directly in your headunit without the need for FM modulation or any loss in audio quality. This unit is compatible with all 6 volt XM or SIRIUS Satellite Radio receivers. Please see the following PDF to determine which part is required for your make and model of vehicle.
XM6 Compatibility Chart
- Note: It is crucial that you refer to the P.I.E. DPX protocol converter application guide for special notes and details on each specific vehicle. Applicable years vary depending on the model of the vehicle.
- The XM6-AUD combines PIE's proven adapter technology with the power adaptation needs of XM
& Sirius Satellite Radio receivers. Once properly installed (instructions included), not only will you immediately enjoy the best possible sound quality that XM
& Sirius have to offer but the convenience of having the power jack plug right into your radio with out need for a cigarette lighter plug. The XM6-AUD knows when your vehicle is turned on or off, and will cause your Satellite Radio receiver to turn on and off accordingly. The XM6 will also charge the battery on your portable unit while the vehicle is on. XM6 PROTOCOL CONVERTERS are design to use the CD Changer port of selected OEM radios to provide a direct audio input plus all necessary power connections. The XM6 protocol converters consist of a vehicle specific harness that connects to the OEM radio directly or via a pre-wired data cable. A small 2.5" X 3.5" converter box houses a 6-Volt DC jack and a 3.5mm audio jack. Any 6 volt receiver may then be connected into the DC and audio jacks utilizing the included DC power and 3.5mm audio cable(s). The XM6 protocol converter will power the receiver when the vehicle is running or the key is in ignition position. The receiver will automatically turn off when the vehicle is turned off.
|
|
|